Download GPX file for this article
-34.03693318.309550Full screen dynamic map

From Wikivoyage
Jump to navigation Jump to search

The dive site Oakburn and Bos 400 is a 1994 wreck overlapping a historical wreck, on a shoreline rocky reef in the Karbonkelberg headland area on the Atlantic seaboard of the Cape Peninsula, near Cape Town in the Western Cape province of South Africa.

Understand

[edit]
Map of the dive site at the wrecks of the SS Oakburn and the crane barge Bos 400
Aerial view of the dive sites at the Oakburn and Bos 400. (Photo CDS&M)
The helipad of the Bos fell off in early September 2010
See also: Diving the Cape Peninsula and False Bay#Understand

The site is mainly interesting for the wreck of the Bos 400, and what remains of the Oakburn. The marine life is better represented at other nearby sites.

Position

[edit]
  • 1 SS Oakburn and Bos 400 wrecks: S34°02.216’ E018°18.573’

The position is unmistakable as the Bos is clearly visible above the water for a long distance. The Oakburn is to the south west of the Bos, almost under its stern, and somewhat deeper. There is some overlap.

This site is in the Table Mountain National Park Marine Protected Area since 2004. A permit is required. The site is within the Karbonkelberg restricted area.

Name

[edit]

The "SS Oakburn", a British cargo steamer of 3865 tons, was wrecked in fog on 21st May 1906, on a voyage from New York to Sydney. Two lives were lost. Its cargo included railway lines and equipment, glassware, sewing machines, musical instruments, oil and paper. The Oakburn has pretty much fallen apart, and on 27 June 1994, the crane and pipelaying barge "Bos 400" broke its towline during a north westerly gale while under tow by the Russian tug "Tigr", and ran aground virtually on top of the older wreck. Unsuccessful efforts were made to reconnect the tow and salvage the vessel. The Bos is also starting to break up and it is possible to do some penetrations on the submerged sections. Length of the Bos 400 was about 100 m and displacement about 12000 tons. The helicopter platform collapsed in September 2010, and the central section of the hull a week or two later. The crane base remains firmly aground and upright on the inshore rocks.

Depth

[edit]

Maximum depth on the Oakburn is about 22 m, mostly shallower. The Bos is mostly shallower, but is scattered down the slope to at least 20 m. Parts of the wreckage extend above the water at all tides.

Topography

[edit]

Granite corestone point with two steel wrecks.

The older Oakburn lies deeper and further to the west, to the stern of the Bos, among moderate to large boulders and outcrops. The wreck is severely broken up and the plates and framing are fairly mangled, though there are a few places a diver can get under them. There are three scotch boilers grouped to the northwest of the exposed part of the Bos, on sand bottom at 21 m. The top of the boilers is at about 18 m depth.

The recent Bos 400 is largely intact and a large section is still perched high on the rocks, with only part of its upper deck awash. There is a large space under the stern which can be penetrated like a cavern, which is fairly free of snags and is open along a wide area. Other penetrations on this section may be possible in calm weather, but swell causes powerful surge around and through the openings in the stern. The sides were clad with heavy vertical timbers for protection when laying pipes.

In September 2010 the section of the hull which had supported the helipad broke away and slid down and to the north, and the helipad fell off and came to rest on the reef slightly to the north at an average depth of approximately 13 m. Various components of the wreck now lie on the bottom in this area, some of which are easily accessible for penetrations.

Later in September 2011 the middle section of the hull also broke away and slid down to the north, and appears to have broken up considerably. The debris includes an area just adjacent to the remaining exposed part with the crane, which is covered with torn and twisted plating, and sections of pipe of various diameters. There are also a few 50 litre gas cylinders and the armature of a large electric motor.

To seaward there is a large pipe with a surrounding cylindrical casing with perforated ends, a section of superstructure which is now upside down and a small crane base with a box section boom. There is also a large structure of heavy tubing with a sliding block and what appears to be a hydraulic piston, and at the end of the structure a large conical opening. This may have been part of the pipe-laying equipment.

The end section which supported the helipad is only slightly submerged. The deck is about 5 m deep, and has a few large openings into the interior. This section is rectangular in plan, and is strongly wedged in place by several rocks which have penetrated the bottom plating, locking it in place on top of the boulders.

The wreck is now a considerably more interesting dive site than when the vessel was intact, as there are now large number of interesting artifacts and structural components lying around, some of which can be penetrated.

Geology: Granite outcrops and boulders of the late Pre-Cambrian Peninsula pluton

Conditions

[edit]

The site should preferably only be dived on calm days as it is in an exposed position. There can be a very strong surge through the shallower wreckage.

The site is exposed to swell from the west, and protected from wind and chop from the south east. The site is usually at it's best in summer but there may also be occasional opportunities in other seasons.

This is an area which sometimes has upwellings caused by south easterly winds, which result in cold clear water, and may be followed by a plankton bloom, which will reduce visibility again.

Get in

[edit]
See also: Diving the Cape Peninsula and False Bay#Boat dives

The site is only accessible by boat as there are no roads in the area. The site is about 7.4 km from Hout Bay harbour.

See

[edit]

Marine life

[edit]
See also: Diving the Cape Peninsula and False Bay#The marine ecology

Marine life is typical of the area but not particularly noteworthy. A careful search will reveal quite a lot of colourful corals, sponges and anemones sheltering in crevices.

Features

[edit]

Historical and recent wrecks. The Bos is largely intact, though it is deteriorating rapidly as it is in the surf zone. Penetration is possible, but can be tricky in the shallow sections due to the surge.

Photography

[edit]

There are no macro subjects worth setting up for. This is a site for wide angle photography, and on a good day the lighting is reasonable.

Routes

[edit]

No recommendations available at present.

Stay safe

[edit]
See also: Diving the Cape Peninsula and False Bay#Stay safe

Hazards

[edit]

Cold water, Strong surge. Ragged wreckage. Probably a high risk of entrapment in some sections of the Boss.

Skills

[edit]

No special skills required for non-penetration dives.

Equipment

[edit]
See also: Diving the Cape Peninsula and False Bay#Equipment

A light will be useful as there are lots of holes and openings to look into.

Nearby

[edit]
Map
Oakburn and Bos 400 wrecks and nearby dive sites. The orange line is the border of the Karbonkelberg restricted area

Back to the Alphabetical list of sites, or list of dive sites in the Oude Schip and Leeugat area

Other regional dive sites:

This dive guide to SS Oakburn and MV Bos 400 has guide status. It has a variety of good, quality information including location, conditions and equipment, and info on marine life and other sights. Please contribute and help us make it a star!